PS4 Controller Not Connecting: Common Issues
You can be facing many problems if your PS4 controller not connecting to your console. Interference, a defective battery, and firmware issues are possible causes.
In addition, the most frequent cause of PS4 controller connectivity problems is sync problems. It’s possible that someone synchronized the controller with a different console or device, or it may have fallen out of sync on its own. In rare circumstances, a firmware problem with the controller can even stop it from properly syncing up.
You can have a problem with your USB cord or batteries in addition to sync problems. Hence, to complete the sync procedure, you’ll need a USB cable that can transport power as well as data. Your controller may not connect if there are issues with damaged cables or broken USB ports. Since PS4 controllers link wirelessly via Bluetooth, signal interference is another issue that you could be facing. Thus, a lot of wireless gadgets near your PS4 might interfere with your controller’s ability to connect.
Ways To Solve The PS4 Controller Not Connecting Issue
You’re not the only one with a PS4 if you’ve discovered that you can’t connect your controller to the system. It is because a lot of other PS4 owners are also claiming that their ps4 controller not connecting. However, this is a frustrating problem. If your controller is not connected to your PS4 correctly, you cannot play games on it. And you’re likely looking for a solution to link your controller to your system. Hence, do not worry. Fixing this problem is feasible. The following are a few options for you to consider:
Connect A Data Wire To Your PS4 Controller
The first thing you should attempt if your PS4 controller isn’t working wirelessly is to connect it via a cable. You might try using the cable that comes with your PS4 system to connect it. However, you ought to try another one if this one doesn’t work. A USB cable with a micro-USB connection is what you ought to use. Furthermore, many Android cell phones utilize this sort of wire.
Use the functional cable to connect your controller and console. Afterward, restart your console. Your console will automatically detect and connect your controller if this way works for you.
Reset The PS4 Controller
Another efficient method to get your PS4 controller back is to reset it. If your PS4 controller not connecting to your console, try resetting it by following these steps:
- Switch off the PlayStation 4.
- On the opposite side of your controller, locate the reset button next to the L2 shoulder button.
- Next, press and hold down the button for a few seconds using a tiny, unfolded paperclip or a similar object. Then click the button to release it.
- Link your PS4 system and controller together. Next, switch on your PS4.
As a result, your controller will now connect to your PS4 console if this technique works for you.
Completely Restart Your PS4 System
Your PS4 system can be experiencing integrity difficulties, causing your PS4 controller not connecting. Hence, to test whether it resolves the problem, you may try completely restarting your PS4 console:
- On your PS4, press and hold the power button until the second beep sounds. Then click the button to release it.
- Unplug the controller that was not connecting to the console and the power cable.
- Take a couple of minutes off your PS4.
- Replug the controller and power cord into the console.
- Activate the PlayStation 4. Hence, examine whether the controller functions properly now.
Read More: Create iCloud Email
PS4 Controller Not Supported by PC
The PS4 controller is not compatible with Windows 10 computers. As a result, on your PC, you require a third-party program similar to DS4Windows. Not only can you connect the PS4 with the DS4Windows program, but you can also set up the controller to perform at its peak. This is how the tool can be useful:
- Install DS4Windows on your computer after downloading it.
- Configure the program that has been installed. All you need to do is follow the directions on the screen, which should only take a few minutes.
- To enable DS4Windows, you must install the drivers after configuring the program. Installing the application is simple because the necessary drivers are included in the setup.
- Furthermore, Advanced Driver Updater aids in maintaining the most recent versions of your DS4Windows drivers.
- Your Windows 10 PC is compatible with a PS4 DualShock controller after the program is installed.
Cut Out Bluetooth Interference Sources
Your PS4 and controller may be experiencing excessive interference if your controller turns on but you are unable to sync it via wired or wireless means, or if it disconnects rapidly. If any adjacent devices are using Bluetooth or causing interference in the same 2.402–2.4835 GHz range that your controllers are using, try disconnecting them. Furthermore, try bringing your controller into closer proximity to the console as well. Hence, if that makes it functional, interference is most likely the cause.
Last Note
It might be quite frustrating if your PS4 controller not connecting to your system. Thus, to troubleshoot your issue, you can try the methods listed above. We hope that these techniques will enable you to connect your PS4 DualShock controller to your computer and resolve the issue of it not functioning.